Download Print this page

JVC AV28BT7EEB Instructions Manual page 9

Colour television
Hide thumbs

Advertisement

Program.
(Programming)
Menu
Program. (Programming)
menu is used to display the pro-
gramme names and numbers. You can use this menu to de-
lete a channel, to insert a channel and to autostore the pro-
grammes.
Select the PROGRAM.
menu pressing "P A" or "P v"
but-
ton and open it pressing "4" or "1," button. When you enter the
programme menu, all the programme numbers and names
will be displayed on the screen. The programme number and
name of the tuned channel will be shown by the red colour.
All the other channel numbers will be black and at first the
programme
number 0 will be flashing. You can move the
flashing number using "P A" or "P v"
or "4" or "I_" button. As
you pass through the programme numbers this way, to reach
the programme number you want, the channels correspond-
ing to the programme numbers you pass through will not be
tuned.
Pressing the RED button will tune the channel on the flashing
programme number. Now the colour of the flashing program-
me number will be red. Again you can use "P A" or "P v" or
"4" or "I_" button to move the flashing number.
To delete a channel from a programme
number:
• Move the flashing onto the channel you want to delete.
• Press the YELLOW button. Now the corresponding channel
will be deleted and all the other channels below this pro-
gramme number will be moved one programme number up.
To insert a channel into a programme number:
• Move the flashing onto the selected channel.
• Press the RED button, so that channel will be displayed on
the screen.
• Move the flashing onto the selected programme number.
Now pressing the GREEN button will insert the channel on
screen displayed into that programme number. If a channel
is moved to a lower programme number, channels between
the previous and current position of the selected channel will
be moved one programme number up and if a channel is
moved to a upper programme number, channels between
the previous and current position of the selected
channel
will be moved one programme number down.
AUTOSTORE
If you enter the AUTOSTORE
menu, you can automatically
programme the received channels in your TV's programmes
with APS (Automatic programme system ).
1. After displaying the PROGRAM.
menu, press the BLUE
button to enter the AUTOSTORE
menu. The message
"ALL PRESTORED PROGRAMMES WILL BE ERASED "
will appears.
2. If you want to start programming, press "I," button. The
message" A.P.S. IS RUNNING PLEASE WAIT" appears
and APS automatically programmes the received channels
in your TV's programme numbers. Afrer APS is finalized,
the PROGRAM. menu appears again.
To cancel APS, press "STANDARD" button.
TV Config.
(Configration)
Menu
This menu is used to select the Menu language, the Country
where you are now located and to select the source of AV-2
Output (SCART 2).
• In the Installation menu, Press "P A" or "P v"
button to se-
lect TV Config.
Then press "4" or "I_" button to enter the
"'IV Config." menu.
Selecting Menu Language
• In the "TV Config."
menu select Language
and change
the language to the one you desire, using "4" or "!," button.
As soon as you change the language, the menu items will
be displayed in the selected language.
Selecting Country
• In the "TV Config." menu select "Country"
using "P A" or
"P v" button. Change the country pressing "4" or "I_" button.
Setting External Source Output
• You can use this menu to select the internal or external
source that will be output at AV-2 (SCART 2) terminal.
• In the "'IV Config." menu select "AV-2 Output" using "P A"
or "P v"
button. Then select the source you want to be out-
put at AV-2 (SCART 2) pressing "4" or "I_" button (one of the
sources: "I'V,AV-1 (SCART 1) or AV-3 (Front AV).
ENGLISH
- 8-

Advertisement

loading

  Also See for JVC AV28BT7EEB

  Related Manuals for JVC AV28BT7EEB