Table of Contents
Advertisement
Operating
Instructions
(continued)
TO TURN
UNIT OFF:
remote
sensing
temp/timer
auto
)
hi,
fitter
reed
Io
reset
V
ON=OFF
A
FAN SPEED
steep
DO THIS;
I
PRESS
ON/OFF
BUTTON
YOU WILL SEE;
temp/timer
i
|auto
remote
hi
fitter
sensing
reed
lo
reset
V
ON=OFF
A
FAN SPEED
steep
ADDITIONAL
THINGS
YOU
SHOULD
KNOW
Now thatyou have masteredthe operating procedure, hereare more features inyourcontrol thatyou shouldbecome familiar with
//_
• The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly.
/_
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue
\
to run during this time.
•
There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having
to roll through to select another mode.
• The control will maintain the set temperature
within 1 degrees Celsius, between 16 °C and 32 °C.
, After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
Fresh Air Vent Control
(on some models)
The Fresh Air Vent allows the air conditioner to:
Recirculate inside air - Vent Closed (see Fig. 1)
2. Draw fresh air into the room - Fresh Air (see Fig. 2)
3. Exchange air from the room - Vent Open (see Fig. 3)
Figure 2 (FRESH AIR)
AUGER WHEELS
(8-WAY)
Figure 3 (VENT OPEN)
Air Directional
Louvers
Air directional
louvers control air flow direction. Your air conditioner
has the louver
type described below.
Auger Type
The louvers will allow you to direct the air flow Up or Down and Left or Right
throughout
the room as needed. Rotate the Auger Wheels until the desired
Left/Right direction is obtained. Pivot horizontal louvers until the desired
Up/Down direction is obtained.
02009
Electrolux Home Products, Inc.
All rights reserved,
e-_
Advertisement
Table of Contents
