Washing Procedures - Frigidaire GLEH1642FS0 Owner's Manual

Washing Procedures
Sort laundry into loads that can be
washed together_
Emptypockets.
• Follow the guidelines below for preparing the wash load.
• Read tile Washer Operating Instructions for operating your specific raodel.
• Always read and follow fabric care and laundry product labels.
To reduce the risk of fire, electrical shock, or injury to persons, read
Important $afetytnstructions before operating this washer.
3.
Sort laundry into loads that can be washed together.
Sort items by recommended water temperatures, wash time, and agitate/spin
speeds.
• Separate white, light, and colorfast items from dark and noncolorfast items.
Separate items which shed lint from items which attract lint. Permanent
press, synthetic, knit and corduroy items will pick up lint from towels, rugs
and chenille bedspreads.
Separate heavily soiled items from lightly soiled items.
Separate lacy, sheer and loosely knit items from sturdy items.
2.
Prepare items for washing.
• Empty pockets.
• Brush off lint and dirt. Shake out rugs and beach towels.
• Close zippers, fasten hooks, tie strings and sashes,and remove nonwashable
trims and ornaments.
• Remove pins, decorative buttons, belt buckles, and other objects which
could be damaged. This also helps protect other items in the wash load.
• Mend rips and tears to prevent further damage during washing.
• Place delicate items such as bras and hosiery in amesh bag to prevent
tangling during the wash cycle.
• Turn knit items inside out to prevent pilling.
3. Pretreat stains and heavy soiL
See Stain Removal for details.
Place delicate items in a mesh bag_
\
Add laundry load to washer_
4m
Add laundry lead to washer.
• Combine large and small items in a load. Load large items first. Large
items should notbe morethan half thetotat wash toad.
Washing, such as a sweater, bath towel or jeans, is
not recommended. As the machine tumbles the load prior to final spin,
it may sense an out-of-balance load. If an out-of-balance load is
sensed, the washer will stop briefly and tumble for a short time to try to
balance the load. This stop4umble action may occur several times
before the end of the o!cle. If tile load can not be evenly balanced,
items may feel wet at the end of tile cycle. Adding 1 or 2 similar items
will help balance the load.
If a load becomes tangled and out-of-balance, it may be necessary to
rearrange the load by hand. Stop the washer by pushing in the cycle
selector knob and open the door. Remove the load, untangle the items
and return the load to the tub. Close the door and restart washer.
A single bulky item, such as a bedspread, comforter or sleeping bag,
can be laundered without adding extra items to the load.
Tile washer can be fully loaded, but tile items should not be tightly packed.
The door should close easily.