Table of Contents
Advertisement
SETTING
CONTINUOUS
BAKE
OR 12
HOUR
ENERGY
SAVING
The TIMER pad controls the Continuous Bake or 12 Hour
Energy Saving features. The oven control has a factory
preset built-in 12 Hour Energy Saving feature that will
shut off the oven if the oven control is left on for more
than 12 hours. The oven can be programmed to override
this feature for Continuous Baking.
To set the control for Continuous
Bake or 12 Hour
Energy Saving features
1.
Press and hold TIMER for 6 seconds.
After 6 seconds "12hr" or "-=h" will appear in the
display and the control will beep once.
2.
Press A or v
pad to switch between the 6 Hour
Energy Saving and continuous bake features.
Note: "12hr" in the display indicates the control is set for
the 12 Hour Energy Saving mode and "- =h" indicates
the control is set for the Continuous Bake feature.
3.
Wait 4 seconds to accept the change (display will
return to time of day) or press CANCEL pad to reject
the change.
SETTING
TEMPERATURE
DISPLAY
=
FAHRENHEIT
OR CELSIUS'
The BROIL pad controls the Fahrenheit or Celsius
temperature display modes. The oven control can be
programmed to display temperatures
in Fahrenheit or
Celsius. The oven has been preset at the factory to
display in Fahrenheit.
To change display from
Fahrenheit
to Celsius or
Celsius to Fahrenheit
1.
Press BROIL pad and hold for 6 seconds. A beep
will sound, "---" will appear and "BROIL" will flash
in the display. After 6 seconds a beep will be heard
and "F" or "C" will appear in the display. If "F"
appears, the display is set to show temperatures
in
Fahrenheit. If "C" appears, the display is set to show
temperatures in Celsius.
2.
Press A or v
pad to switch between Fahrenheit or
Celsius display modes. The display will show either
"F" or "C".
3,
Wait 4 seconds to accept the change or press
CANCEL pad to reject the change,
SETTING
THE CLOCK
The SET CLOCK pad is used to set the clock. The clock
may be set for 12 or 24 hour time of day operation.
The clock has been preset at the factory for the 12 hour
operation. When the range is first plugged in, or when
the power supply to the range has been interrupted, the
timer in the display will flash.
To set the clock (example below for 1:30)
1.
Press SET CLOCK. "CLO" will appear in the display.
2.
Press A or v
pad to set the correct time of day.
Wait 5 seconds to accept the change or press the
CANCEL pad to reject the change. The new time of
day will appear in the display.
CHANGING
BETWEEN
12 OR 24 HOUR
TIlE
OF DAY DISPLAY
1.
Press and hold SET CLOCK for 6 seconds. "CLO" will
appear in the display.
2.
CONTINUE
holding the pad until "12h" or "24h"
appears in the display and the control beeps once.
3.
Press A or v
pad to switch between the 12 and 24
hour time of day display. The display will show either
"12h" or "24h".
4.
Wait 5 seconds to accept the change or press
CANCEL pad to reject the change.
5.
Reset the correct time as described in To set the
Clock above. Please note that if the 24 hour time
of day mode was chosen, the clock will now display
time from 0:00 through 23:59 hours.
Advertisement
Table of Contents
