Installing T He Mountingbracket - Electrolux E36WC45FSS Use & Care Manual

installation
INSTALLTHE MOUNTING BRACKET
• • • • • • • • • • • • • • • • • • • • • •
Ducted and Non-Ducted Hoods
1 Construct wood wall framing that is flush with interior surface of walt studs.
Make sure:
a the framing is centered over installation location.
b the height of the framing will allow the mounting bracket to be secured to the
framing within the dimensions shown.
2 After watt surface is installed, secure the mounting bracket to framing with (2)
4.8x38mm mounting screws. See chart below for mounting bracket location.
FRAMING
WOOD CROSS SUPPORT
BEHIND DRYWALL DRYWALL
Figure 7
CEILING DUCT
HEIGHT METHOD
8=FEET
9-FEET 37" 38" 39" 40" 41 42" 43"
1O=FEET 39" 40" 41" 42" 43"
NOTE : Minimum hood distance above cook top must not be less than 24" A maximum of 30" above
cook top is highly recommended for best capture of cooking impurities. Distances over 30" are at
the installer and user's discretion; and if ceiling height and flue lenght permit
DUCTED
NON-DUCTED
DUCTED OR
NON-DUCTED
DUCTED OR
NON-DUCTED
WITH EXWC45S
HOOD DISTANCE ABOVE 36" HIGH COOKTOP (SEE NOTE BELOW)
24" ! 2s" ! 26" ! 27" ! 2a" I as" ! as"
MOUNTING BRACKET LOCAT]ON ABOVE 3a" HIGH COOKTOP
37" 38" 39" 40" 41" j
37" 38" 39" 40"