Preparing The Hood - Electrolux E36WC45FSS Use & Care Manual

Installation
PREPARETHE HOOD
• • • • • • • • • • • • • • • • • • • • • •
Note: On stainless steel hoods, carefully remove the plastic protective film from all
exterior surfaces of the hood and decorative flues, prior to final installation,
DuctedHoods Only
1. Remove the tape on the electrical system plate; place the electrical system plate
on the hood (use a protection), Figure 10,
ELECTRICAL
SYSTEM
PLATE
\
PROTECTION
Figure 10
DISCHARGE
COLLAR _
DUCT i
CONNECTOR_
Figure 11