Canceling A Cycle; Changing A Cycle Or Setting; Adding Items During A Cycle; Option Selections - Inglis IPC25054 Use & Care Manual

Hide thumbs Also See for IPC25054:
Table of Contents

Advertisement

Available languages

Available languages

Pots & Pans
Use this cycle for hard-to-clean,
heavily soiled pots, pans,
casseroles, and regular tableware.
Use both detergent dispenser sections.
Wash
Rinse
Rinse
Main
Rinse
Final
Dry
Time
Water
Wash
Rinse
(rain)
Usage
(gal/L)
98
8,6/32,7
Heavy Wash
Use this cycle for loads with with heavy food soil.
Use both detergent dispenser sections.
Wash
Rinse
Rinse
Main
Rinse
Final
Dry
Time
Water
Wash
Rinse
(rain)
Usage
(gal/L)
90
7.2/27,2
Normal Wash
Use this cycle for loads with normal amounts of food soil. (The
energy-usage label is based on this cycle.)
Use covered detergent dispenser section.
Wash
Rinse
Rinse
Main
Rinse
Final
Dry
Time
Water
Wash
Rinse
(rain)
Usage
(gal/L)
81
4,3/16,3
Rinse Only
Use this cycle for rinsing dishes, glasses, and silverware that will
not be washed right away.
Do not use detergent with this cycle.
Wash
Rinse
Rinse
Main
Rinse
Final
Dry
Time
Water
Wash
Rinse
(rain)
Usage
(gal/L)
20
2,9/10.9
You can cancel a cycle at any time.
1. Turn the cycle control knob slowly clockwise until you hear
water draining. Let the dishwasher
drain completely.
2. Open the door.
3. Turn the cycle control knob to Off.
You
1.
2.
3.
can change a cycle anytime during a cycle.
Lift the door latch to stop the cycle.
Turn the cycle control knob clockwise.
Check the detergent dispensers. They must be filled properly
for the new cycle.
NOTE: Turning the cycle control knob can cause the covered
detergent dispenser section to open and release the
detergent. Check the covered section if the cycle uses
detergent in both sections.
4. Close the door firmly until it latches. The dishwasher starts a
new cycle.
You can add an item anytime before the main wash starts, or the
cycle control knob reaches Normal Wash.
1. Lift up the door latch to stop the cycle. Wait for the spraying
action to stop before opening the door.
2. Open the door and add the item.
3. Close the door, but do not latch it. Wait 30 seconds for the air
in the dishwasher to warm up. This reduces the amount of
moisture escaping from the vent when restarting a cycle.
4. Close the door firmly until it latches. The dishwasher
resumes
the cycle.
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
anytime before drying begins.
No Heat Dry
Select this energy-saving
option to dry without heat. No heat
drying is usdul when loads contain plastic dinnerware that may
be sensitive to high temperatures.
The dishes take longer to dry, and some spotting can occur. For
best drying, use a liquid rinse aid. Some items (such as plastics)
may need towel drying.
NOTE: The dishwasher automatically
heats the air in the
dishwasher during the "dry" portion of the cycle unless you
select No Heat Dry.
Hi-Temp Boost
Select this option to add extra heat to the water in the Heavy
wash or Normal wash cycles. This helps remove food soil.
Reset Options
Select this option to change an option setting. You can change
option settings anytime during a cycle as long as the cycle has
not passed the point where the option is used. For example, you
can press No Heat Dry anytime before the cycle control knob
reaches Dry.
1. Press RESET OPTIONS.
2. Press 1 or more options.
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ipu25363Ipc2505Ipu2536

Table of Contents