Troubleshooting
Message
Cause
Solution
Cameraerror #XXXX. An error is detected.
Turnthe Mode dial off, then back
Seeuser'sguide,
on. If the messagereappears,
contact CustomerSupport
(page36).
Camera ready light status
Status
Cause
Solution
Readylight doesnot
Camerais not turned on. Turnon the camera(page4).
turn on and the
Batteriesare exhausted Install new batteries(page 2) or
cameradoesnot
work.
or are not charged.
Mode dial wason when
batterieswere reloaded.
chargerechargeable batteries.
TurnMode dial off, then backon.
Flashis not charged.
Camerais initializing.
Readylight blinks
Pictureis being
Camerais operating normally.
green.
]rocessedand savedto
the camera.
Readylight blinks
amber.
Readylight blinks red Batteriesare low or
andcameraturns off. exhausted.
Readylight glows
Camera'sinternal
steadyred.
memoryor card isfull.
Cameraprocessing
memoryis full.
Cardis read-only.
Wait. Resume picture taking when
the light stops blinking and turns
green.
Install new batteries(page 2) or
chargerechargeable batteries.
Transferpicturesto the computer
(page27), deletepicturesfrom the
camera(page 17), switch image
storagelocations(page 12),or insert
a cardwith availablememory
(page7).
Wait. Resume picture taking when
the light turns green.
Changethe imagestorage location
to internalmemory(page 12),or use
a different card.
Readylight glows
Camerais on; readyto
Camerais operating normally.
steadygreen,
take a picture or video.
35