Advertisement
Available languages
Available languages
_iiiiiiiiIii/ii_
iNS|
2 To turn off your TV, press @ (power). The TV
goes to Standby mode and the
Power/Standby indicator turns red.
Note
If you are going to be away for an extended time,
disconnect
the power cord from the power outlet,
Changing
channels
To change channels:
•
Press OH A or Y on the front of your TV or
on the remote control.
To enter a channel number directly:
•
Press the number buttons on the remote
control.
In digital TV mode, a main (major) channel
can have one or more sub (minor) channels.
Press the number buttons to enter the main
channel, press the • button (to the left of the 0
button), then press the number button for the
sub-channel.
For example, if you want to
watch channel 5.2, press 5, press the •
button, then press 2.
To go to the previous channel:
•
Press RECALL.
Adjusting
the volume
You can adjust the volume using the controls on
your TV's side panel or the remote control.
To adjust the volume:
1 Press VOL+ or VOL- to increase or decrease
the volume.
2 Press MUTE to mute the sound. To restore
the sound, press this button again, or the
VOL+ or VOL-.
Selecting the video source
To select the video source for your TV:
1 Press INPUT to display the Input Source List.
2 Press A or Y to select the source you want
(initially select TV), then press ENTER.
Memorizing receivable channels
Channel scan creates a list of receivable
channels for the current input (antenna or cable).
You need to run channel scan for each RF input
to create a list of available channels from both
inputs.
To scan for receivable channels:
1 Press MENU. The Main menu opens.
2 Press 4 or I_ to select the TV menu icon.
The TV Menu opens.
3 Press V to select Channel Scan, then press
ENTER.
Channel Scan automatically
creates a list of
receivable channels. Press MENU at any
time to interrupt the memorization process
(the list will not be created if the scan is
interrupted).
4
5
I
Status:
Scanning .....
Cable
1
Analog
Channels:
25
Digital
Channels:
0
I
,
I
47%
Press ENTER to display the received
channel list, then press A or Y to select a
channel.
Press ENTER to show the channel detail
information.
•
*
.
l;
D
:
For digital main channels, which might
include many subchannels (for example 9-1
or 9-2) that show programs at the same time,
press ® with 0-9 buttons to select digital
channel (for example,
9.1).
Selecting
the aspect ratio
The Wide Screen feature lets you view 4:3 or
16:9 images in wide screen mode. Press ZOOM
repeatedly to cycle through the available screen
formats.
NORMAL--Displays
at 4:3 aspect ratio. Content
with 4:3 aspect ratio is centered on screen with
black bars on right and left.
b ¸k¸¸
Note
NORMAL is not available when you are watching a
720p, 108@, or 1080p source,
Advertisement
Chapters
