Using Your Tv; Turning The Tv On And Off - Insignia NS-PDP50HD-09 User Manual

}A ¢ / / _ 50
The screen resolution of your TV is optimized
during for the display modes listed below. If the
signal from the PC is a standard resolution, the
screen is adjusted automatically. If the signal
from the system is not standard, adjust the
screen resolution by referring to your video card
user guide, otherwise there may be no picture.
Vertical Horizontal
Resolution frequency frequency
(Hz) (kHz)
729 x 499 85 37.9
649 x 489 69 31.5
72 37.9
75 37.5
85 43.3
899 x 699 56 35.1
69 37.9
72 48.1
75 46.9
85 53.7
i: 85 68.7
1 2x864 ............ s ........... 67: ...............................
128o io24 6 o ..... 64:o ..............
Connecting an audio receiver or Dolby Digital 5.1
sound system
You can connect your TV's audio to a digital
amplifier or home theater system.
Back of
TV (£" "}} " ..........
To connect to an audio receiver or Dolby
Digital 5.1 sound system:
1 Plug RCA audio cables into the OUTPUT
AUDIO L (white) and AUDIO R (red)jacks on
the back of your TV, then into the AUDIO L
(white) and AUDIO R (red) input jacks on the
audio receiver.
-OR -
2
Plug an optical cable into the DIGITAL
AUDIO OUTPUT jack on the back of your TV,
then into to optical input jack on your Dolby
Digital 5.1 sound system.
POWER
Press _ to turn on your TV.
Arranging the cables
After connecting the cables, bundle the cables
using the cable guide as shown.
'_ Cable guide
Using the swivel base
The viewing angle of your TV may be adjusted
approximately 60 ° to the left or right as shown.
Audio cable
Audio amplifier I or receiver
Using your TV
Turning the TV on and off
To turn your TV on and off:
1 Press (b (power) on the TV or remote
control. The POWER/STANDBY indicator
turns blue and your TV turns on.