Table of Contents
Advertisement
CABLE WITH
CONVERTER/DESCRAMBLER
BOX
If your cable service supplies you with a converter box
you can use the basic connection shown here.
With this connection you can record and view any chan-
nel including scrambled channels. However, channel se-
lection must be made with the converter box. This means
that channels cannot be changed using the TV/VCR Re-
mote Control. Unattended recording is limited to one
channel at a time.
TO RECORD
AND VIEW A SCRAMBLED/UN-
SCRAMBLED CHANNEL
1. Set the TV/VCR channel selector to the output chan-
nel of the Cable Converter Box. (Ex. CH3)
2. Select the channel to be recorded or viewed on the
Cable Converter Box.
Box (not supplied)
From Cable System
75-ohm
NOTE:
When using a cable converter box, you can not
record one channel and view another.
1) Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.
2) Insert 2 "AA" penlight batteries into the battery com-
partment in the direction indicated by the polarity
(+/-) markings.
3) Replace the cover.
*
When using an external input
AUX
signal (another VCR or cam-
corder), connect the player's
audio/video output cables to
the AUDIO IN, VIDEO IN
jacks of your TV/VCR. Then
press CHANNEL • or • button or enter "00" with
number button so that "AUX" appears on the screen.
i
EN
- 11 -
6F18
Advertisement
Table of Contents
