HOW TO USE THE REMOTE TO CONTROL
YOUR TV
MENU,
CURSOR Buttons
ENTER,
Allthe on-screendisplayfeaturescan be set or adjustedby usingthese buttons.
The "MENU" buttonwillstartor exitthe on-screen display.
The "CURSOR" buttons will highlight functions or adjust different features.
®
The "ENTER"buttonwillset features to yourpreference.
CHANNEL SELECTOR Buttons
"CHANNELSELECTOR" buttonsare usedto set the time,for channelmemory,etc.
Entertwoorthree numberstoselectchannels. Enter"0"firstfor channels1 to 9. Forchannel100 and higher,press
the "1" button,wait untilanotherdashappearsnexttothe channeldisplayonyourTV, then enterthe remaining two
numbersusingthe numberbuttons.
Channel selection may also be performed by pressing channel up ( A ) or down (V).
NOTE:
The TV may not receive some channels if you are not in the correct AIR/CABLE mode. See page 25,
I
AVX Button
The AVX (AuxiliaryVideo) buttonwillselectbetweenthe antennasignal and the video inputjacks eachtimethe
buttonispressed. Ifthe Picture-in-Picture ( PIP) is on,the AVX will selectbetweenthe video input jacks only.
(See page 18.)
T
AVX
O
AVX
I
VIDEO:2
16