Table of Contents
Advertisement
HOW TO USE THE REMOTE TO CONTROL
YOUR TV
MENU, ENTER, CURSOR buttons
All the on-screen display features can be set or adjusted by using these buttons.
The "MENU" button will start or exit the on-screen display.
The "CURSOR" buttons will highlight functions or adjust different features.
®
The "ENTER" button will set features to your preference.
"CHANNEL SELECTOR" buttons are used to set the time, for channel memory, etc..
CHANNEL SELECTOR buttons
Enter two or three numbers to select channels. Enter a "0" first for channels 1 to 9. Use the "100" button for channels
100 and higher.
Channel selection may also be performed by pressing channel up ( • ) or down ( • ).
I
NOTE:
The TV may not receive some channels if you are not in the correct AIR/CABLE mode. (See page 25)
I
®
AVX button
The AVX (Auxiliary Video) button will select between the antenna signal and the two sets of video input jacks each
time the button is pressed.
If the Picture-in-Picture
(PIP) is on, the AVX will select between the two sets of video
input jacks. (See page 18)
I
ESPN
STEREO
28
ST/SA
AVX
VIDEO:I
(S-IN)
AVX
VIDEO:2
AVX
16
Advertisement
Table of Contents
