Prepare Window For Installation; Position Air Conditioner - Haier ESA415J Use & Care Manual

NOTE: Cover
p utty knife blade with masking tape to guard
against damage of the unit finish.
1. Measure the width of the window opening.
2. Mark the center line on the inside windowsill.
CAUTION:
Never expose plastic front or griNNe to extreme temperatures.
r
Assemble Curtain/Top channel
.................................. r
NOTE: Attach curtains to the air conditioner before placing the air
conditioner in window.
1. Install top channel with four 13/32" screws.
2. Slide left-hand curtain assembly into left end of top and bottom
channels. Repeat for right-hand curtain assembly.
3. Fasten curtain retainer strips to the sides of the outer case with
eight 13/32" screws..
A B
_\\\x
B
A. Width of window opening
B. Center line
Excessive Weight Hazard
Use two or more people to move and install
air conditioner,
Failure to do so can result in back or other injury,
NOTES:
[] Handle the air conditioner gently.
[] Be sure your air conditioner does not fall out of the opening
during installation or removal.
[] The place where the power cord exits the air conditioner
should be no more than 4 ft (122 cm) from a grounded outlet.
[] Do not block the louvers in the front panel.
[] Do not block the louvers on the outside of the air conditioner.
A. Top channel
B. 13/32" screws
C. 13/32" screws
D. Side curtains
A. Side curtain against window channel
B. Window sash behind top channel
C. Bottom channel in behind windowsill
NOTE: Your model may differ from the one shown.
6