Table of Contents
Advertisement
OPERATION
TO EMPTY GRASS CATCHER
(See Fig. 10)
1.
Lift up on grass catcher using the frame handle.
2.
Remove grass catcher with clippings from under lawn
mower handle.
3.
Empty clippings from bag.
NOTE: Do not drag the bag when emptying;
it will cause
unnecessary wear.
FRAME
HANDLE
FIG. 10
TO CONVERT
MOWER
Your lawn mower was shipped ready to be used as a
mulcher. To convert to bagging or discharging:
REAR BAGGING (See Fig. 11)
•
Open rear door and remove mulcher plug.
Store
mulcher plug in a safe place.
You can now install the grass catcher.
To convert to mulching or discharging operation, install
mulcher plug into rear discharge opening of mower.
MULCHER
PLUG
SIDE DISCHARGING (See Fig. 12)
Mulcher plug must be installed into rear discharge
opening of mower.
Open mulcher door and install discharge deflector
under door as shown.
e
e
Mower is now ready for discharging operation.
To convert to mulching
or bagging
operation,
dis-
charge deflector must be removed and mulcher door
closed.
\
\
/
OPEN
MULCHER
DOOR
DISCHARGE
DEFLECTOR
\
\
FIG. 11
FIG. 12
8
Advertisement
Table of Contents
