Hotpoint HTS22GBMARCC Owner's Manual & Installation Instructions page 7

www.Hotpoint.com
Slide-Out Spillproof Sheff (onsomemodels)
The slide-out spillproof shelf allows you
m reach imms stored behind others. The
special edges are designed to help prevent
spills flom dripping m lower shelves.
Toremove:
O Remove all items from shelf.
O Slide the shelf out until it stops.
I,ift the front edge of the shelf until the
cenmd tabs are above the flont baL
O Continue pulling the shelf forward
until it can be removed.
Toreplace:
Place the rear shelf tabs just in front of
the central notches on the shelf flame.
O Slide the shelf in until the central robs
are slightly behind the flont bar.
I,ower the shelf into place until it is
hofizont_d and slide the shelf in.
Makesurethat theshelfsitsflat afterreinstallation
anddoesn't m ovefreelyfromsideto side.
Makesureyoupushtheshelves all thewayin
beforeyouclosethedoor.
_r hold
Snugger
Adjustable Bins on the Door
Adjustable bins can easily be carried flom
refligerator to work area.
Toremove: I_iff bin
straight
tap, then
pull out.
Toreplace or relocate: Engage the bin in
the molded supports of the (loot; and
push in. Bin will lock in place.
Thesnugger helps prevent dpping, spilling
or sliding of small imms stored on the door
shelf. Grip the finger hold near the rear of
the snugger and move it m fit your needs.
Non-Adjustable Shelves on the Door
Toremove: I Jft the shelf smfight up then
pull out.
Toreplace: Engage the shelf in the molded
supports on the (loot and push down. It will
lock in place.
Freezer Tilt Out Bin (onsomemodels)
Push die button as you flit out die bin.
Toremove: Hold file sides of file bin and
lift it suaight up, then pull out.
Toreplace:
Engage the ends of the bin in
the molded supports on the door, and
push down. It will lock in place.
NOTE:Do not overloadthe bin.
7