Table of Contents
Advertisement
Read these instructions completely and carefully.
ToolsYouWill Need
Forlevelinglegs:
• ( hannel lock pliers
Forgassupplyconnection:
• Pipe wrench
Forconversion fromNaturalto LPgas:
• 1/2-inch open-end wrench
Forburnerflameadjustment:
• Phillips head and bladeqype s(rewdrivers
p
Additional Materials YouMay Need
• (;as line shut-offvalve.
ForFlexibleConnection:
• Pipe joint sealant that resists action of I 2 gas.
• 1/2-inch pipe nipple,
ForRigidConnection:
• Pipe fittings as required.
• Flexible metal appliance connector
(same 3/4-in(h
or 1/2-in(h I.D. as gas
supply line).
• Flare union adapter line
( 1/2-m( h NPT x 3/4-m( h or 1/2-m(h I.D.).
Installo gthe Backguard
[]
Remove the cooktop.
[]
Place the backguard
on top of the end panels
at the rear of the range.
[]
(_onnect the "disconnect
plug" (for power u)
the ba( kguard fiom the range).
[]
Insert the machine screws through the lower
inside flange ofthe end (aps and the end
panels. Se(ure with the hex nuts provided.
[]
Insert the inachine screwsthrough the
elongated holes at the bottom of the
backguard and side flange of the burner box.
Secure xdth the hex nuts provided.
[]
Attach the lower edge of the backguard to
the vent outlet with 2 sheet inetal sciews.
25
Advertisement
Table of Contents
