FujiFilm FINEPIX JZ200 series Owner's Manual page 73

Edit movies.
• MOVIETRIMMING
Remove opening or ending footage to create an edited copy of the current movie.
1 Display the desired movie.
2 Select [] MOVIE EDIT in the playback menu, then select MOVIE TRIMMING. To remove
footage from the start of the copy, proceed to Step S; otherwise, proceed to Step 4.
3 Press the selector down to begin playback and press it down again when the new opening
flame is reached.
4 Press MENU/0R.To remove footage from the end of the copy, proceed to Step 5; otherwise,
proceed to Step 6 (to exit without creating an edited copy, press DISP/BACK).
5 Press the selector down to begin playback and press it down again when the new closing
flame is reached.
6 Press MENU/0R to save the copy.
• MOVIEJOIN
Add existing footage to the end of the current movie to create an edited copy.
1 Display the desired movie.
2 Select [] MOVIE EDIT in the playback menu, then select MOVIE JOIN.
3 Press the selector left or right to highlight a movie.
4 Press MENU/OKto add the highlighted footage to the end of the current movie and save the
resulting copy, or press DISP/BACK to exit without creating a copy.
_, Both movies must have been recorded at the same frame size and frame rate and have a
combined file size of no more than 2 GB.