FujiFilm FINEPIX JZ200 series Owner's Manual page 62

Vew g >c_eso _Co_ p_ _
4 Remove the installer CD from the CD-ROM drive. Note that you may be
unable to remove the CD if Safari is running; if necessary, quit Safari before
removing the CD. Store the installer CD in a dry location out of direct sun-
light in case you need to re-install the software.
5 Mac OSX10.5 or earlier: Open the "Applications" folder, start Image Capture,
and select Preferences,,, from the Image Capture application menu. The
Image Capture preferences dialog will be displayed; choose Other,,, in the
When a camera is connected, open menu, then select FPVBridge in the
"Applications/FinePixViewer"folder and click Open. Quit Image Capture.
MacOSXlO.6: Connect the camera and turn it on. Open the "Applications"
folder and start Image Capture. The camera will be listed under DEVICES;
select the camera and choose FPVBridge from the Connecting this cam-
era opens menu and click Choose. Quit Image Capture.
Installation is now complete. Proceed to"Connecting the Camera"(_ 49).
(_0 _'ct<) S