Olympus X-715 Advanced Manual page 95

Troubleshooting
OWhen the camera is connected to a computer or printer
The printer fails to connect.
[PC] was selected on the Remove the USB cable, and start again from P. 58
monitor after connecting Step I of"Connecting the camera to a
the camera to the printer 3rinter".
with the USB cable.
The printer does not Refer to the printer's instruction manual or -
support PictBridge. contact the manufacturer.
The camera is not recognized by the computer.
The computer failed to Disconnect the USB cable from the camera, P. 58
recognize the camera, and connect it again.
The USB driver has not Install OLYMPUS Master. P. 75
been installed.