Olympus X-715 Advanced Manual page 66

Direct printing (PictBridge)
(f an error code is displayed on the camera's monitor during direct print setting or
print)ng, see the foUow)ng table.
For more details, refer to the printer's instruction manual.
Monitor indication Possible cause Corrective action
The camera is not connected Disconnect the camera and
NO CONNECTION to the printer correctly, connect it again correctly.
There is no paper in the Load some paper in the
NO PAPER 3rinter. printer.
The printer has run out of Replace the ink cartridge in
NO INK ink. the printer.
8"_ The paper is jammed. Remove the jammed paper.
JAMMED
The printer's paper Do not reconfigure the
cassette has been removed
printer after the settings have
SETTINGS CHANGED or the printer configuration been made.
has been changed.
E_ Turn off the camera and
There is a problem with the printer. Check the printer and
3dnter and/or camera, remedy any problems before
PRINT ERROR
turning the power on again.
TIps
"_ * If an error code other than those shown above is
"'- (P. 89).
n
displayed, see "Error codes"
66