Hitachi 61SBX59B Operating Manual page 60

THEATER
I
TEST
TONE
I A test sound is generated allowing the listener to balance volume from each channel. Adjust the
volume levels until all channels are equal.
TEST TONE
PRO LOGIC
NORMAL
_ 67%
CENTER 4_b 67%
FRONT R d__ 67%
REAR 4_b, 67%
MAIN d__. 50%
MENU ITO MENU BAR TO QUIT I EXIT
CURSOR
TEST TONE
PRO LOGIC
NORMAL
CENTER
FRONT R
._rl_ 67%
,d__. 67%
MAIN ___. 50%
MENU ITO MENU BAR TO QUIT I EXIT
DOLBY PRO LOGIC
DOLBY 3 STEREO
Press CURSOR • or • to highlight, then press CURSOR • to select TEST TONE.
Automatic scanning of applicable speakers for your chosen Surround mode will occur. Simply wait until the speaker you wish to adjust
is highlighted (static noise will be heard from this speaker), then use CURSOR < or • to adjust VOLUME. (Adjust balance by adjusting
Front L and Front R volume control.)
Press EXIT to quit menu or MENU to return to previous menu.
NOTE: correctWhen in Dolby Surround Mode, the Audio-Advanced Settings-Perfect Volume feature will automatically be disable to ensureDOLBY SURROUND sound decoding. I
I
GRAPHIC
EQUALIZER
I Use this function to precisely control tonal quality by using seven different frequency controls.
THEATER MODES
SURROUND
WIRELESS SOUND
SUB WOOFER
MENU ITO MENU BAR TO QUIT I EXIT
CURSOR
÷@÷
llllill
60 150 400 _K 2K 4.5K 10K
I_ GRAPHIC EQ. rqBASS/TREBLE
MENU ITO MENU BAR TO QUIT I EXIT
Press CURSOR • to select the frequency you wish to adjust.
To increase the amount of frequency audio to all speakers, use CURSOR •.
To decrease the amount of frequency audio to all speakers, use CURSOR •.
Press EXIT to quit menu or CURSOR • to return to previous menu when the CURSOR is in the first position.
NOTE:
I
When this function is used or adjusted, the AUDIO SETTINGS functions BASS and TREBLE will be disabled and I
LOUDNESS will be set to off.
I
6O