Panel Connections - Hitachi 36FX42B Operating Manual

REAR PANEL JACKS
O Antenna Inputs (36CX35B)
The VHF/UHF terminal can be used for normal "I'V, cable TV (CA]V), a video game, etc.
Antenna Inputs (Except 36CX35B)
The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can
be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture (ANT B cannot be displayed as a
sub-picture.) The antenna output labeled "TO CONVERTER" allows the ANT A connection to pass direc':ly to a different source such
as a cable box.
AudioNideo Inputs 1, 2
The INPUT button will step through each video source and antenna source input each time it is pressed. Use the audio and video
inputs to connect external devices, such as VCRs, camcorders, laserdisc players, etc. (If you have monc sound, insert the audio
cable into the left channel jack.)
I_) Monitor Out (Except 36CX35B)
These jacks provide fixed audio and video signals which are used for recording.
Q Audio to HI-FI
These jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to the stereo can be
controlled by the television's main volume. Use these jacks for the SURROUND Left and Right channels. (See page 20.)
Q S-Video
Input 1 provides S-Video (Super Video) jacks for connecting equipment with S-Video output capability.
TIPS ON REAR PANEL CONNECTIONS
The S-Video connection is provided for high performance laserdisc players, VCRs etc., that have this feature. Use this connection in
place of the standard video connection if your device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the TV.
Refer to the operating guide of your other electronic equipment for additional information on connecting your hookup cables.
A single VCR can be used fi)r VCR #1 and VCR #2, but note that a VCR cannot read its own video or line output (INPUT: 1 in the
example on page 15 or 16). Refer to your VCR operating guide for more information on line input-output ,connections.
14