Charging The Battery - HP Photosmart R607 User Manual

Charging the Battery
NOTE This section tells how to charge a Battery in the camera.
You can also charge the Battery in the extra Battery bay of
the camera dock or in the HP Photosmart Quick
Recharger (seeAppendix B: Purchc_singCamera
Accessorie_ on page 161 ).
"] Plug the power cord into the HP AC adapter. If more than
one power cord is in the box, use the cord that is
appropriate for power outlets in your country. Plug the other
end of the power cord into an electrical outlet.
2 Open the small rubber
door on the side of the
camera.
3 Attach the thin cord from
the AC adapter to the
power adapter connector
_%._ on the side of the
camera as shown.The
Power light on the top of
the camera will start
blinking to show that the battery is charging.
The rechargeable lithium ion battery will usually charge fully in
4-6 hours. When the Power light stops Blinking, the Battery is
fully charged, and you can then unplug the power adapter
from the camera. You can continue to use the camera while the
Battery is being charged by the power adapter.
NOTE The camera may get warm while it is charging the
battery, as well as after prolonged use under battery
power. This is normal.
16 HP Photosmart R507/R607 User's Manual