Haier XQG65-11SU User Manual page 12

XQG65-11SU -MANUAL 10/29/02 1:50 PM F/_ 13
Temperature
The water temperature is preset so when you select wash cycle it will set the proper
temperature for that wash load,
Please see the chart below to understand the proper temperature for each cycle:
Type of Cycle Type of Temperature
Cotton Cycle
Pre-Wash Cold
Normal Hot
Quick Warm
Express Cold
Rinse Cold
Synthetic Cycle
Normal Warm
Quick Warm
Express Cold
Rinse Cold
Delicate Cycle
Normal Cold
Rinse Cold
Note: Hot water needs to be at a temperature of at least 120 degree [ 140
Degree F (49 Degree C - 60 Degree C) for the soap to dissolve and to avoid
soap residue remaining on clothes, If your water temperature is not at above
described level when washing your clothes, you need to regulate your water
heater to maintain that temperature,
Loading the Washer:
• Load each item loosely.
• Separate the white and colored clothes, Separate heavy clothes from light clothes.
• Carefully check all pockets and cuffs for small items. They can easily slide in to the
tub and may damage the tub,
• Pre-treat all stains and heavily soiled areas for best results,
• Do not overload your washer.
• Close the door properly after loading the clothes,
11