Advertisement
to restore the C partition to the state of the last backup.
System Recovery:
Choose this option to recover the state of the last backup for the
system. This operation restores the primary data on the C partition to
the state of the most recent backup.
Backup Uninstallation:
Choose this option to uninstall the data you backed for the C partition.
Note:
You can only keep one system backup image. Another system
backup operation will overwrite the data of the last backup, and
cause all the data of that backup to be erased.
The operation of system backup checks if there is enough disk
space for the backup. If the size of your C partition is too big,
you may see the prompt "Backup operation could not get
enough space!".
Carry out the operation again if it fails or stops, or if the
power is pulled off suddenly during the system backup or
recovery.
Do not shut down or restart the computer or pull off the power
during System Backup or System Recovery. Otherwise it might
damage the hard disk, causing data to be erased or rendering
the software useless.
Do not shut off or restart the computer or pull off the power
during Backup Uninstallation or partition adjustment. Otherwise
it might damage the hard disk, leading to data loss.
2.
System Backup
Choose System Backup by pressing or
key to enter the backup prompt interface. Press the E key to continue,
as figured underneath:
keys, then press the Enter
Advertisement
