Table of Contents
Advertisement
Evolution MK-425C/MK-449C/MK461C Getting Started
Installing The MK-425C/449C/461C OMS Driver
1.
Click and drag the USB Drivers Installer from the OS 9 window it is currently
in, to the desktop.
2.
Double click on the icon. If a window appears, click 'Open'.
3.
Double click on the newly created USB Drivers Installer on your desktop.
4.
Click 'Install'.
The installer automatically places the drivers in the correct system folders.
6.
Once the installer has finished installing the drivers, click 'Restart'.
7.
Switch on the MK-425C/449C/461C (14).
OMS Setup
You now have to run the OMS Setup program:
1.
Open the Hard Drive, then the 'Opcode' folder, the 'OMS Applications folder',
and then 'OMS Setup'.
2.
If you get a message to switch Appletalk on or off, choose either options.
This will make no difference to the OMS Setup.
3.
In the next window, click 'OK'.
4.
Click 'Search'.
5.
Click 'OK'
6.
Then 'OK' again.
7.
Click 'Save'.
8.
If it asks you, click 'Replace'.
You should now have a final window showing your current Studio Setup.
If 'Quicktime Music' is crossed out, you should double click on it, then click in the 'on'
circle to enable it. Then click 'OK'.
Now you're ready to go. Just make sure your Evolution keyboard is selected as the MIDI
input in your music software.
Using An External Power Supply
You can also use a mains adapter (not included) with the following specification: 9V DC
output, 250-300mA, centre positive.
Make sure you are not powering the Evolution keyboard already via USB, then simply
plug in the power supply to the socket labelled DC 9V (15) and switch the power on (14).
Note: Do not leave the adapter plugged in for long periods of time if the unit is not in use.
10
Hide quick links:
Advertisement
Table of Contents
