Before Setting Oven Controls - Gibson GEF357CBSB Owner's Manual

Before Setting Oven
Controls
Oven Vent Location
The oven is vented between the cooktop and the backguard. When the oven
is on, warm air is releasedthrough the vents. This venting isnecessary for proper
air circulation in the oven and good baking results.
Arranging Oven Racks
(Some models may have one rack.)ALWAYS ARRANGE OVEN RACKS WHEN THE
OVEN IS COOL (PRIORTO OPERATING THE OVEN). Always use oven mitts when
using the oven.
To remove an oven rack, pull the
rack forward until it stops. Lift up front
of rack and slide out. To replace an
oven rack, fit the rackonto the guides
on the oven walls. Tilt the front of the
rack upward and slide the rack back
into place.
To bake on one rack, place the rack
on the third or fourth rack position
from the top of the oven. To bake on
two racks (some models), place the
racks on the second and fourth rack
3ositions from the top.
1 st Rack Position
nd Rack Position
rd Rack Position
th i1_:: P°pt:_o:iittii;: