GE PSH25MSSASV Owner's Manual And Installation page 26

Installation Instructions
INSTALLING THE REFRIGERATOR
REFRIGERATOR LOCATION
• Do not install the refrigerator where the
temperature will go below 60°F (16°C)
because it will not run often enough to
maintain proper temperatures.
• Do not install the refrigerator where the
temperature will go above 100°F (37°C)
because it will not perform properly.
• Install it on a floor strong enough to
support it fully loaded.
CLEARANCES
Allow the following clearances for ease
of installation, proper air circulation and
plumbing and electrical connections:
23' (33" wide),
23'/25' CustomStyle
TM
25', 26', 27', 29'
Sides 1/8" (4 mm) 1/8" (4 mm)
Top 1" (25 mm) 1" (25 mm)
Back 1/2" (13 mm) 1" (25 mm)
DIMENSIONS AND SPECIFICATIONS
Water Electrical
_'_3/4" (19ram)Airspace
(1/2"[13 lem] Gap+
1/4" [6 ram]Wall Plates)
' J'L '
25" (63.5cm)
Countert0p
DIMENSIONS AND SPECIFICATIONS
(for 23" CustomStyle
TM
models)
o
70¼" (178.4 cm
36"
(91.4cm)
DIMENSIONS AND SPECIFICATIONS
(for 25" CustomStyle
TM
models)
O
O
72¼" (183.5 cm)_
36"
(91.4cm)
........ 2 2 ........
"721/4 rl
(183.5 cm) required for full adjustment
of mobility wheels. If cabinets installed
above refrigerator have doors that are
flush to the top of the opening for the
refrigerator, then an additional 1/8 'I may be
required to provide clearance for cabinet
doors to open freely.
26