GE DDE9200G Use And Care Manual page 12

The Problem Solver (continued)
PROBLEM POSSIBLE CAUSE AND REMEDY
WRINKLING IN
PERMANENT PRESS
AND "NO-IRON"
ITEMS (continued)
• Accumulation of lime scale due to use of carbonate detergents. If you must use a
non-phosphate detergent, avoid the use of a high-carbonate detergent.
• Failure to use thbric softener. Proper use of thbric softener will minimize wrinkling.
To remove wrinkles:
• Retumble on "Permanent Press" setting.
• Rerinse and dry on "Permanent Press" setting.
• If unsuccessful, returnble on high heat for 10-12 minutes and hang immediately.
• Iron carefully.
• Send to dry cleaners for pressing.
• Some wrinkles may remain which cannot be removed.*
•NOTE:Ifyoufollowgoodlaundry procedures and Permanent Press clothes still come
out wrinkled, the finish may not be good quality. Also, in permauent press symhetic/
cotton blends, the cotton portion of the fabric cau evemually wear away leaving only the
symhetic. Since it's the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
If you need more help., call, toll free:
GE Answer Center"
800.626.2000
consumer information service
12