Download  Print this page

GE WISQ416C Owner's Manual page 7

Hide thumbs

Advertisement

Pour liquid fabric softener
and water into fabric softener
dispenser
This dispenser
automatically
releas-
es liquid
fabric softener
at the prop-
er time during
the cycle. To use,
follow these steps:
1 Make sure dispenser
is securely
attached
to agitator.
2 Pour liquid
fabric softener
into dispenser,
using amount
recommended
on package.
3 Add water to dispenser
until it
reaches
the maximum
fill line.
NOTE:
• Do not stop the washer during
the first spin. This will cause
the dispenser to empty too soon.
• Do not use the Fabric Softener
Dispenser
with the Auto Soak.
• Never pour fabric softener directly
on clothes. It will leave spots on
clothes.
Only use dispenser for liquid fabric
softeners. If dispenser gets clogged,
see Cleaning section below.
Do not pour anything into the
agitator if the top is removed
Separate for cleaning
1 Remove
the dispenser
from the
top of the agitator.
2 Separate
the dispenser
cup from
the cover by grasping
the top and
pushing
down on the inside of the
cup with your fingers.
Dispenser
cup will pop free fl_om
the cover.
3 To clean
dispenser,
soak both
the
dispenser
cup and
the
dispenser
cover in a solution
of warm water
and liquid detergent.
4 If necessat T, loosen
build-up
with
a clean,
soft cloth after soaking.
Do not use a stiffbmsh;
you may
roughen
the surface
of the dis-
penser.
5 Rinse and reassemble
dispenser.
Place dispenser
back on the
agitator.

Advertisement

loading

  Also See for GE WISQ416C

  Related Manuals for GE WISQ416C

This manual is also suitable for:

Wisq416dWisq416f