Advertisement
Available languages
Available languages
Problem
Possible Causes
What to Do
Fill hoses or drain hose is
improperly
connected
Make sure hose connections
are tight at taps
and make sure end of drain
hose is correctly
inserted
in and secured
to drain
facility.
Household drain may
* Check household
plumbing. You may need
be clogged
to call a plumber.
Constant water pressure
to the
* Tighten hoses at the taps and turn the water
fill hoses at the water source
off after each use.
* Check condition
of the fill hoses; they may
need replacement
after 5 years.
Washer
is uneven
Washer
load is unbalanced
Shipping
rod has not been
removed
Water
is draining
Make sure washer
is level and firm
to the floor.
Push the Cycle knob in to stop the
washer, open the lid and redistribute
the load evenly. Close the lid and restart.
Remove the shipping rod on the bottom
right side of the washer.just before sliding
the washer in place. Do not use the washer
with the shipping rod in place.
There will be a gurgling,
"sucking" sound
prior to the spin cycle. This is normal and
will stop as soon as the machine goes into
the spin cycle.
The washer normally
pauses
between
washing
steps
Incorrect
cycle
selected
• Make sure the cycle selected matches the
load you are washing.
This is normal
for some fabrics
/2
Advertisement
