Installation Overview - Axis 5900 User Manual

Basic Installation (Wired & Wireless)

Installation Overview

Setting up Using the
Ethernet Interface
14
Select the appropriate method to establish a connection between the
workstation / laptop and the Axis Network Print Server. The following
descriptions provide an overview of the installation procedures:
"Setting up Using the Ethernet Interface"
•
"Setting up over the WLAN"
•
• To establish communication with the network, an IP address must be
assigned to your Axis Network Print Server. See
Address to the Print Server"
• Once the connection has been established, proceed with creating a
Configuring the Axis Network Print Server for Wireless
certificate. See
Printing
, on page 23.
• Next, enable https in the print server for secure Web services. See
Configuring the Axis Network Print Server for Wireless Printing
23.
Set the WLAN Network Mode and enter the SSID, WLAN channel and
•
WEP keys according to your network, see
Network Print Server for Wireless Printing"
• The Axis Network Print Server must be restarted for the WLAN settings
to take effect. On power up, the Axis Network Print Server will
automatically select WLAN communication if there is no Ethernet cable
connected. Disconnect the network cable and disconnect and reconnect
the Axis Network Print Server power supply.
on page 14
on page 15
"Assigning an IP
on page 16.
"Configuring the Axis
on page 23
AXIS 5900 User's Manual
, on page