Axis 5900 User Manual page 103

Example:
Note:
ASCII to Postscript
Conversion
AXIS 5900 User's Manual
Hex Code
01
0A
02
0D 0A
4. Click the OK button.
This is the default setting for logical printers PR5 through PR8.
Assume that you want to replace the UNIX New Line (hex
NewLine (hex ), and the printer command
0D 0A
(hex ) for logical printer PR2.
E
Y 1B 59
C
Follow the instructions below to substitute command strings:
1. From the print server's internal Web page, select Admin | Logical Printer
Settings.
2. Select the Printer2 tab.
3. Enter the string 01 0A 02 0D 0A 03 1B 47 31 02 1B 59 in the String
Substitutions text field.
Hex code
01
0A
02
0D 0A
03
1B 47 31
02
1B 59
4. Click the OK button.
Extensive use of string substitutions will naturally decrease the throughput
rate of the Axis Network Print Server.
The Axis Network Print Server logical printers can translate ASCII print
data into PostScript format. This makes it possible to print with a
PostScript printer from a host that does not support PostScript. The
conversion is selected by activating a filter that converts ASCII data into
Postscript. This filter can be activated individually for each logical
printer.
Activate your desired filter by setting the Printing Language Translation
(PRx_FILT) parameter.
Management and Configuration
Explanation
length of the string you want to replace
the string you want to replace
length of the substitute string
the substitute string
E
Explanation
length of the UNIX New Line command
the UNIX New Line command
length of the ASCII New Line command
the ASCII New Line command
length of the replaced printer command
the replaced printer command
length of the new printer command
the new printer command
) with an ASCII
0A
(hex ) with
G1 1B 47 31
C
103