GE GSH25JFPACC Owner's Manual And Installation Instructions page 15

Installation Instructions
DOOR ALIGNMENT
After leveling, make sure that doors are even at the top.
To make the doors even, adjust tile refrigerator door.
O Using a 5/16" socket wrench, turn tile door adjusting
screw to the right to raise the door, to tile left to lower
it. (A nylon plug, embedded in the threads of the pin,
prevents the pin from turning unless a wrench is
used.)
O After one or two turns of the wrench, open and close
tile refrigerator compartment door and check the
alignment at tile top of tile doors.
To remove the base
gdlle, oDen thedoors
andthen pullthe
gdlle straightout
15