GE JGP628 Owner's Manual page 12

Cleaningthe glass cooktopsurface, co. s omo
Cleanyourcooktopafter
each spill. UseCERAMA
BRYTE ® Ceramic Cooktop
Cleaner.
Normal Daily Use Cleaning
ONLY use CEIL_d_JIABRYTE _'Ceranfic
Cooktop Cleaner on the glass cooktop.
Other creams ma_ not be as effective.
To maintain and protect the sudi_ce of
veto" glass cooktop, tollow these steps:
[] Betore using the cooktop fin,
the fi_t time, remoxe the burner
grates and clean the cooktop
with CEI_d_JIA BRYTE ('_Ceramic
Cookto I) Cleaner This helps
protect the top and makes
cleanup easier
[] Daily use of CEI_d_IA BRYTE <_'
Ceramic Cooktop Cleaner will help
kee I) the cooktop looking new.
[] Shake the cleaning cream well.
Apply a fi_w drops of CEI_L_dVIA
BRYTE e_Ceramic Cooktop Cleaner
directly to the cooktop.
[] Use a paper towel or CEIL_4A
BRYTE _' Cleaning Pad fiw Ceramic
Cooktops to clean the entire
c()()kt() I) S/liS[;ice.
[] Use a dry cloth or paper towel
to reinove all cleaning residue.
No need to rinse.
NOTE: It/a very important that you DO NOT
heat the cooktop until it has been cleaned
thomughlg
Burned-On Residue
WARNING: DAMAGE to your glass surface
may occur if you use scrub pads other than
those recommended
Usea CERAMA BRYTE _ Cleaning
Pad for Ceramic Cooktops.
[] Allow the cooktop to cool.
[] Remoxe
the bm'ner grates and
spread a few drops of CEIL_IA
BRYTE _' Ceramic Cooktop Cleaner
on the entire burned residue area.
[]
Using the included CEIL_A
BRYTE ' Cleaning Pad fi,r Ceramic
(_ooktops, rub the residue area,
alI))lying, , pressm'e as needed.
[]
[]
If any residue remains, repeat the
steps listed above as needed.
For additional protection, after all
residue has been remoxed, polish
the entire surfiwe with CEI_L_JIA
BRYTE (':Ceramic Cooktop Cleaner
and a paper towel.
The CERAMA BRYTE '_3 Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Cente_
See instructions under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
[] Allow the cooktop to cool.
[] Remove the burner grates. Use a
single-edge,, razor, blade scral)er at
approximately a 45 ° angle against
the glass surfitce and scrape the
soil. It will be necessary to apply
pressure to the razor scraper in
order to I'el//ove tile residue.
[]
After scraping with the razor
scrapeI; spread a Iew drops of
CEI_.IA BRYTE _:Ceramic
Cooktop Cleaner on the entire
burned residue area. Use the
CEI{_.IA BRYTE _?Cleaning Pad to
remove any remaining residue.
[]
For additional protection,
after all residue has been
removed, polish the entire
surthce with CEI_dMA
BRYTE _
Ceramic Cooktop (2leaner
and a paper towel.
12