GE DJSR473ET Use And Care Manual page 6

OPERATING YOUR DRYER
FOR MODELS DJSR473ET AND DJSR473GT
WARNING---To reduce the risk of fire, electric shock, or injury to persons when using your
appliance, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
FABRIC CARE EXTRA CARE
C0TP0,NS PIElU_PIUESS
I)IE_,_,,AT1ES M0 HEAT
L0W HEJI*T
o
o O
7 Cycle Automaffc
Heavy Duty Super Capacity
Features and appearances may vat 3 '
O Drying Selections. Select the proper heat on the
Fabric Care selector for your load.
Should be used with cycles indicated •
Drying Automatic Automatic Timed
Selections Cottons Perm. Press
Cottons • •
High Heat
Perm. Press • •
Medium Heat
Knits/Delicates • •
Low Heat
Fluff •
No Heat*
*Fluff-No Heat option can be used with an automatic cycle, but for
best performance it is recommended to be used with a timed cycle.
O
Cycle Selector. Turn the Cycle Selector to the
desired cycle setting. The: selector may be turned
in either direction.
O Extra Care Cycle. The Extra Care cycle operates
only with the Automatk: Perm. Press and Automatic
Cottons cycles. Turn the Extra Care knob to SET and
turn the Cycle Selector Dial to the desired amount of
heated drying time.
To minimize the wrinkle setting in clothe,s, _te Extra
Care cycle provides approximately 15 - 18 minutes of
no-heat tumbling after the clothes are dr),.
Start. Turn the Start knob to start the dryer. (Opening
the door during operation stops the dryer. To restart,
close the door and follow above directions.)
NOTE: Drying times will vary according to the
type of heat used (Electric, Natural gas or LP
gas), size of load, types of fabrics, wetness of
clothes, and condition of exhaust ducts.
ENERGY SAVING TIPS
,, Use Automatic Cycles whenever possible to help • Dry your clothes in consecutive loads. Using a
prevent overdrying and to save energy. "warm" dryer will save energy.
,5