Lint Filter; Loading; Care And Cleaning; Dryer Exhaust - GE DJSR473ET Use And Care Manual

CARE AND CLEANING
USER MAINTENANCE INSTRUCTIONS
CAUTION: If yours is an electric dryer, before you have it
connected in your new residence, be sure your licensed electrician
confirms that the supply voltage matches the voltage specified on
the rating plate.
]Dryer Exterior
Wipe off any spills or washing
compounds. Wipe or dust with a
clamp cloth. Try not to strike the
surface with sharp objects.
Dryer control panel and finishes
may be damaged by some laundry
pretreatment soil and stain remover
products if such products are
sprayed on or have direct contact
with the dryer.
Apply these pretreatment products
away t_om the dryer. The fabric
may then be washed and dried
normally. Damage to your dryer
caused by pretreatment products
is not covered by your warranty.
]Dryer Drum
'Your drum is rust-resistant and
requires no special care.
Dryer Exhaust
Inspect and clean the dryer
exhaust ducting at least once
a year. See the section, Maximize
Your Dryer Efficiency by Keeping
the Exhaust Duct Clean.
Dryer ;Storage
To store your dryer for a
short period of time, disconnect
the power supply and .clean the
lint filter.
]Lint Filter
Before every dryer use,
clean the lint filter. Put:
your moistened fingers; at
the comer of the filter and
wipe all the way across to
the other corner.
NOTE: To keep your dryer
operating at peak performance,
be sure to have a technician
vacuum the lint from the
machine every three years.
Lint Filter
J
Periodically,
remove the lint
filter and insert the
suction hose from
your vacuum cleaner
into the opening.
Air Circulation
Do not obstruct the flow of combustion and
ventilating air.
Drum Lamp
BEFORE REPLACING
THE LIGHT BULB, BE
SURE TO UNPLUG THE
DRYER POWER CORD.
Simply reach above loading
opening from inside the
drum. Remove the bulb and
replace with the same size
and wattage bulb.
11