GE GSHF5PGXAEWW Owner's Manual And Installation page 6

About the shelves and bins.
Not all features are on all models.
Snugger_,
Refrigerator bin
Freezer bin
Z
Freezer tilt-out bin
r
Refrigerator Door Bins and Freezer Door Tilt-Out Bins
Large Bins
The larger refrigerator door bins and freezer
tilt-out door bins are adjustable,
Toremove: Lift the front of the bin straight
up, then lift up and out.
The snugger helps prevent tipping, spilling
or sliding of small items stored on the door
shelf. Placea finger on either side of the
snugger near the rear and move it back
and forth to fit gour needs.
Toreplace or relocate: Engage the back side
of the bin in the molded supports of the dooE
Then push down on the front of the bin. Bin
will lock in place.
Small Bins
Toremove: Lift the front of the bin straight up
then out.
Toreplace: Positionthe bin above the
rectangular molded supports on the doo[
Then slidethe bin down onto the support
to lock it in place.
Do not block
CAUTION:On
models with on
ice chute inside
the top freezer
door bin, be
careful when
placing items in
the bin. Hake sure
that items do not
block or fall into
the ice chute.
i
Press tab and pull shelf
forward to remove
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows gou
to reach items stored behind others, The
special edges are designed to help prevent
spills from dripping to lower shelves,
Toremove:
Slidethe shelf out until it reaches the stop,
then press down on the tab and slidethe shelf
straight out.
To replace or relocate:
Line the shelf up with the supports and slide
it into place. The shelf can be repositioned
when the door is at 90° or more. To reposition
the shelf,slide the shelf past the stops and
angle downward. Slide shelf down to the
desired position, line up with the supports
and slide into place.
Hake sure you push the shelves all the way
back in before _lOUclose the door.
6