Arrival Times - TomTom RIDER Manual

The route is calculated by your RIDER.
9. When the route has been calculated, tap Done.
Your RIDER will immediately begin to guide you to your destination, using
both spoken instructions and on-screen directions.

Arrival times

When you plan a route, your TomTom RIDER asks you if you need to arrive at
a particular time.
Tap YES to enter a preferred arrival time.
Your RIDER calculates your arrival time and shows you whether you will arrive
on time.
You can also use this information to work out when you need to leave. If your
RIDER shows that you will arrive 30 minutes early, you can wait and leave in
30 minutes time, rather than arrive early.
Your arrival time is constantly recalculated during your journey. The status bar
shows whether you will arrive on time or if you are going to be late, as shown
below:
Tap Status bar preferences in the Preferences menu, to enable or disable
arrival time notifications.
Select the required options on the first menu screen and then tap Done.
Status bar
preferences
To enable arrival time notifications, select Show leeway to arrival time.
You will arrive 55 minutes before the arrival time you entered.
If the estimated arrival time is more than five minutes before
the time you entered, it is shown in green.
You will arrive 3 minutes before the arrival time you entered.
If the estimated arrival time is less than 5 minutes before the
time you entered, it is shown in yellow.
You will arrive 19 minutes late.
If the estimated arrival time is later than the time you entered,
it is shown in red.
10