Using Arrival Times; Navigation Menu Options - TomTom Blue&Me Reference Manual

Every time your device starts, you are asked if you want to plan a route. If you tap Cancel, you are
shown the Driving View.

Using arrival times

You can set your Blue&Me-TomTom 2 LIVE device to ask you if you need to arrive at a particular
time when you plan a route.
Status bar
After planning a route, tap YES to enter a preferred arrival time.
Your device calculates your arrival time and shows you whether you will arrive on time.
You can also use this information to work out when you need to leave. If your device shows that
you will arrive 30 minutes early, you can wait and leave in 30 minutes time, rather than arrive
early.
Your arrival time is constantly recalculated during your journey. The status bar shows whether you
will arrive on time or if you are going to be late, as shown below:

Navigation menu options

When you tap Navigate to or Drive to, you can set your destination in many ways, not just by
entering the address. The other options are listed below:
Home
Favourite
Tap Status bar in the Settings menu, to enable or disable arrival time
notifications.
To enable arrival time notifications, select Leeway.
You will arrive 55 minutes before the arrival time you entered.
If the estimated arrival time is more than five minutes before the time you
entered, it is shown in green.
You will arrive 3 minutes before the arrival time you entered.
If the estimated arrival time is less than 5 minutes before the time you
entered, it is shown in yellow.
You will arrive 19 minutes late.
If the estimated arrival time is later than the time you entered, it is shown
in red.
Tap this button to navigate to your Home location.
You will probably use this button more than any other.
Tap this button to select a Favourite as your destination.
35