GE JSP57 Owner's Manual page 37

ww_. GEAppliances.com
Possible Causes What To Do
Oven controls improperly set. • See tile Using the oven secdon.
Rack posidon is incorrect • See tile Using the oven secdon.
or the rack is not level.
Incorrect cookware or
• See tile Using the oven section.
eookware of improper
size being used.
Oven thermostat needs • See the Adjust the oven
thermostat-
Do it
yourselfl
adjustment, section.
Oven controls improperly set. • Make sure you touch the BROIL Itl/LO pad.
Improper rack position • See tile Broiling Guide.
being used.
Cookware not suited • Use tile broiling pan and grid that came with your range.
for broiling.
The probe is plugged into the • Unplug and remove tile probe fi'om the oven.
oudet in the oven.
(on some models)
Aluminum foil used on the •SeetheUsingthoovonsecdon.
the broiling pan and grid has
not been fitted properly and
slit as recommended.
In some areas the power • Preheat the broil element for lO minutes.
(voltage) may be low.
• Broil for the longest period of time recommended in
the Broiling Guide.
Oven thermostat • See the Adjust the oven thermostat- Do it yourself!
needs adjustment, section.
The door is out of position. • Because the oven door is removable, it sometimes
gets out of position during installation. To straighten
the door, push down on the high corner.
Rear drawer support is • Reposition the drawel_ See the Storage Drawer
on top of the guide rail. Removal instructions in the Care and cleaning of your
range section.
Power cord maybe • Reposition the drawer and power cord. See the
obstructing drawer
Storage Drawer Removal instructions in the Care and
in the lower back cleaning of your range section.
of the range.
Rear drawer support is • Reposition the drawel_ See the Storage Drawer
on top of the guide rail. Removal instructions in the Care and cleaning of your
range section.
37