Advertisement
SE
ADJ
ENTS
•
ATTACH MOWER SIDE SUSPENSION ARMS (A) TO
CHASSIS - Position hole in arm over pin (B) on outside
of tractor chassis and secure with retainer spring.
•
Repeat on opposite side of tractor.
Fig. 21
•
ATTACH FRONT LINK (E) -Work from left side of trac-
tor. Insert rod end of link assembly through front hole
in tractor front suspension bracket (F).
•
Insert end of link (E) into hole in front mower bracket
(H) and secure with washer and retainer spring (J).
ATTACH REAR LIFT LINKS (C) - Lift rear corner of
mower and position slot in link assembly over pin on
rear mower bracket (D) and secure with washer and
retainer spring.
Fig. 23
•
Install belt onto electric clutch pulley (M).
Fig. 22
Fig. 24
iMPORTANT:
CHECK BELT FOR PROPER ROUTING
IN ALL MOWER PULLEY GROOVES.
•
Raise attachment lift lever to highest position.
•
If necessary, adjust gauge wheels before operating
mower as shown in the Operation section of this manual.
Fig. 25
03000tex
19
Advertisement
