Zoom 3030 player Operation Manual page 25

4 Using the BANK foot switch, select the effect
modules to assign to Foot Switches 1 – 4.
The 3030 has seven types of effect modules, so these can be
divided into the first half and second half for assigning to the
Foot Switches 1 – 4. When you step on the BANK foot switch,
the ON/OFF status of the BANK foot switch LED's change; by
this operation, the effect modules that can be assigned to Foot
Switches 1 – 4 change as follows:
BANK Foot Switch
LED ON
BANK
LED OFF
BANK
When the BANK foot switch LEDs are OFF, Foot Switch 4 uses the
HINT HINT
delay time tap input. (See page 18 .)
5 Use Foot Switches 1 – 4 to switch the respective
effect modules OFF or ON.
6
To return to Play mode, step on the FS01 again.
The 3030 returns to the Play mode, and you can switch the
patch.
If necessary, you can store the switched ON/OFF status of the effect
HINT HINT
modules.
Contents
1 COMP effect module ON/OFF
2
EQ1/WAH effect module ON/OFF
3
DIST effect module ON/OFF
4 EQ2 effect module ON/OFF
1 EFF1/SFX effect module ON/OFF
2 EFF2 effect module ON/OFF
3
REVERB effect module ON/OFF
4
EFF2 delay time tap input
23