Rules For Safe Operation - Troy-Bilt TB6040 XP Operator's Manual

The purpose of safety symbols is to attract your attention to possible
dangers. The safety symbols, and their explanations, deserve your careful
attention and understanding. The safety warnings do not by themselves
eliminate any danger. The instructions or warnings they give are not
substitutes for proper accident prevention measures.
SYMBOL MEANING
SAFETY ALERT:
Attention is required in order to avoid serious personal injury. May
be used in conjunction with other symbols or pictographs.
DANGER:
Failure to obey a safety warning will result in serious
injury to yourself or to others. Always follow the safety precautions
to reduce the risk of fire, electric shock and personal injury.
WARNING:
Failure to obey a safety warning can result in injury
to yourself and others. Always follow the safety precautions to
reduce the risk of fire, electric shock and personal injury.
CAUTION:
Failure to obey a safety warning may result in
property damage or personal injury to yourself or to others.
Always follow the safety precautions to reduce the risk of fire,
electric shock and personal injury.
NOTE: Advises you of information or instructions vital to the operation
or maintenance of the equipment.
NOTE- This Unit Can Use an Electric Start or Power Start Bit™
Optional Accessory!
Please refer to the Electric Starter or Power Start Bit™ operator's
manual for proper use of these features. (Items Sold Separately!
Please refer to page 7 of this manual for more information about
purchasing these accessories.)
Read the Operator's Manual and follow all warnings and safety instructions.
Failure to do so can result in serious injury to the operator and/or bystanders.
FOR QUESTIONS, CALL 1-800-828-5500 IN U.S. OR 1-800-668-1238 in
CANADA
• IMPORTANT SAFETY INSTRUCTIONS •
READ ALL INSTRUCTIONS BEFORE OPERATING
WARNING:
When using the unit, you must follow the safety
rules. Please read these instructions before operating the unit in
order to ensure the safety of the operator and any bystanders.
Please keep these instructions for later use.
• Read the instructions carefully. Be familiar with the controls and proper use of
the unit.
• Do not operate this unit when tired, ill, or under the influence of alcohol,
drugs, or medication.
• Children and teens under the age of 15 must not use the unit, except for
teens supervised by an adult.
• All guards and safety attachments must be installed properly before operating
the unit.
• Inspect the unit before use. Replace damaged parts. Make sure all fasteners
are in place and secure. Replace parts that are cracked, chipped, or
damaged in any way. Do not operate the unit with loose or damaged parts.
• Carefully inspect the area before starting the unit. Remove all debris and hard
or sharp objects such as glass, wire, etc.
• Clear the area of children, bystanders, and pets. At a minimum, keep all
children, bystanders, and pets outside a 50 feet (15 m.) radius; there still may
be a risk to bystanders from thrown objects. Bystanders should be
encouraged to wear eye protection. If you are approached, stop the unit
immediately.
• Never use metal-reinforced line, wire or rope. These can break off and
become dangerous projectiles.
• Squeeze the throttle control and check that it returns automatically to the idle
position. Make all adjustments or repairs before using unit.
SAFETY WARNINGS FOR GAS UNITS
WARNING:
Gasoline is highly flammable, and its vapors can
explode if ignited. Take the following precautions:
• Store fuel only in containers specifically designed and approved for the
storage of such materials.
• Avoid creating a source of ignition for spilled fuel. Do not start the engine until
fuel vapors dissipate.
2

RULES FOR SAFE OPERATION

Indicates danger, warning or caution.
• Always stop the engine and allow it to cool before filling the fuel tank. Never
remove the cap of the fuel tank, or add fuel, when the engine is hot. Never
operate the unit without the fuel cap securely in place. Always loosen the fuel
tank cap slowly to relieve any pressure in the tank when refueling.
• Add fuel in a clean, well-ventilated outdoor area where there are no sparks or
flames. Do not smoke while fueling. Wipe up any spilled fuel from the unit
immediately. Always wipe unit dry before using.
• Move the unit at least 30 feet (9.1 m) from the fueling source and site before
starting the engine. Do not smoke or allow sparks and open flames near the
area while adding fuel or operating the unit.
WHILE OPERATING
• Never start or run the unit inside a closed room or building. Breathing exhaust
fumes can kill. Operate this unit only in a well ventilated outdoor area.
• Be aware of the risk of injury to the head, hands and feet.
• Wear safety glasses or goggles that are marked as meeting ANSI Z87.1-1989
standards. Also wear ear/hearing protection when operating this unit. Wear a
face or dust mask if the operation is dusty.
• Wear long sleeve shirt, heavy long pants, boots and gloves. Do not wear
loose clothing, jewelry, short pants, sandals or go barefoot. Secure hair above
shoulder level.
• The cutting attachment shield must always be in place while operating the
unit. Do not operate unit without both trimming lines extended, and the proper
line installed. Do not extend the trimming line beyond the length of the shield.
• This unit has a clutch. The cutting attachment remains stationary when the
engine is idling. If it does not, have the unit adjusted by an authorized service
technician.
• Adjust the D-handle to your size to provide the best grip.
• Be sure the cutting attachment is not in contact with anything before starting
the unit.
• Use the unit only in daylight or good artificial light.
• Avoid accidental starting. Be in the starting position whenever pulling the
starter rope. The operator and unit must be in a stable position while starting.
See Starting/Stopping Instructions.
• Use the right tool. Only use this tool for the purpose intended.
• Do not overreach. Always keep proper footing and balance.
• Always hold the unit with both hands when operating. Keep a firm grip on
both the front and rear handle or grips.
• Keep hands, face, and feet at a distance from all moving parts. Do not touch
or try to stop the cutting attachment when it is rotating.
• Do not touch the engine or muffler. These parts get extremely hot from
operation. They remain hot for a short time after you turn off the unit.
• Do not operate the engine faster than the speed needed to cut, trim or edge.
Do not run the engine at high speed when you are not cutting.
• Always stop the engine when cutting is delayed or when walking from one
cutting location to another.
• If you strike or become entangled with a foreign object, stop the engine
immediately and check for damage. Do not operate before repairing damage.
• Stop and switch the engine to off for maintenance, repair, or for changing the
cutting attachment or other attachments.
• Use only original equipment manufacturer replacement parts and accessories
for this unit. These are available from your authorized service dealer. Use of
any unauthorized parts or accessories could lead to serious injury to the user,
or damage to the unit, and void your warranty.
• Keep unit clean of vegetation and other materials. They may become lodged
between the cutting attachment and shield.
• To reduce fire hazard, replace faulty muffler and spark arrestor, keep the
engine and muffler free from grass, leaves or other debri.
OTHER SAFETY WARNINGS
• Never store the unit, with fuel in the tank, inside a building where fumes may
reach an open flame or spark.
• Always allow the engine to cool before storing or transporting. Be sure to
secure the unit while transporting.
• Store the unit in a dry area, locked up or up high to prevent unauthorized use
or damage. Keep out of the reach of children.
• Never douse or squirt the unit with water or any other liquid. Keep handles
dry, clean and free from debris. Clean after each use. See the Cleaning and
Storage instructions.
• Keep these instructions. Refer to them often and use them to instruct other
users. If you loan someone this unit, also loan them these instructions.
SAVE THESE INSTRUCTIONS