Connecting A Pc - Sharp AQUOS LC-52LE920UN Operation Manual

Connecting to External Equipment

Connecting a PC

Refer to page 51 for a list of PC signals compatible with the TV.
■ When using HDMI cable (HDMI 1, 2, 3 or 4):
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable
to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to
"HDMI+Analog". (See page 51.)
• The HDMI terminals only support digital signal.
■ When using DVI-HDMI conversion cable (HDMI 1):
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN
terminal and set "Audio Select" to "HDMI+Analog". (See page 51.)
■ When using analog RGB cable (PC IN):
• When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN.
• When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 51.)
16
HDMI-certified cable
HDMI OUT
Ø 3.5 mm stereo minijack cable
AUDIO
DVI-HDMI conversion cable
DVI OUT
(D-sub 15-pin cable or VGA cable)
Ø 3.5 mm stereo minijack cable
RGB AUDIO
Analog RGB cable
Back panel
vertical inputs
Back panel
vertical inputs
Back panel
vertical inputs