Storage; Replacement Parts And Accessories; Repair Service - Remington RM1630U Owner's Manual

STORAGE

If storing saw for more than 30 days, follow steps
below.
1. Drain oil tank after each use.
2. Remove and clean guide bar and chain. Clean
guide bar and chain by soaking in petroleum
based solvent or mild soap and water mix-
ture.
3. Dry guide bar and chain.
4. Place chain in container filled with oil. This
will prevent rust.
5. Wipe a thin coating of oil over surface of guide
bar.
6. Wipe off outside of saw body. Do this with soft
cloth dampened with a mild soap and water
mixture.
7. Store chain saw
• in a high or locked place, out of children's
reach
• in a dry place
REPLACEMENT PARTS AND
ACCESSORIES
WARNING: Use only replacement
parts and accessories described in
this manual. Use of other parts or ac-
cessories could damage saw or injure
operator.
For original replacement parts and accessories,
call 1-866-206-2707 (in Canada call 1-877-696-
5533) or visit www.remingtonpowertools.com.

REPAIR SERVICE

Note: Only use original replacement parts. This
will protect your warranty coverage for parts
replaced under warranty.
For service, please call the Customer Support
Department to obtain a list of authorized service
dealers near you. Service on this unit, both within
and after the warranty period, should only be
performed by an authorized and approved service
dealer.
Call 1-866-206-2707 (in Canada call 1-877-696-
5533) or visit www.remingtonpowertools.com.
20