Charging In Charging Stand; Charging With A Cord - Philips NORELCO Aquatec AT920 User Manual

ENGLISH
12

Charging with a Cord

1 Connect cord directly to razor and
connect the charging plug into any 100V to
240V AC outlet. Use only the power cord
provided.
w An adaptor plug may be necessary for
charging plug usage in some foreign countries.
Use an attachment plug adaptor of the proper
configuration for the power outlet.
The charging plug will automatically convert to
work on 100V to 240V AC systems.
C
w The display on the razor will indicate razor is
charging.
2 Charging and recharging requires a full 1
hour. A fully charged razor has a cordless
shaving time of up to 60 minutes.
C
w When the battery is fully charged, the white
battery symbol lights up continuously.
After approximately 30 minutes, the battery
symbol goes out to save energy.

Charging in Charging Stand

C
w Always place razor in stand in an upright
position making sure charging contacts in
bottom of stand fit into recess in bottom of
razor.
w Always remove razor from stand by lifting
straight up. Do not tilt razor.
1 Place razor in charging stand and connect
the small plug of cord to charging stand.
Connect the charging plug into any 100V
to 240V AC outlet. Use only the power
cord provided.
w An adaptor plug may be necessary for
charging plug usage in some foreign countries.
Use an attachment plug adaptor of the proper
configuration for the power outlet.
The charging plug will automatically convert to
work on 100V to 240V AC systems.
C
w The display on the razor will indicate razor is
charging.
2 Charging and recharging requires one full
hour. A fully charged razor has a cordless
shaving time of up to 60 minutes.
C
w When the battery is fully charged, the white
battery symbol lights up continuously.
After approximately 30 minutes, the battery
symbol goes out to save energy.
ENGLISH
13