Related Manuals for Eden NEMESIS NA-600
Summary of Contents for Eden NEMESIS NA-600
- Page 1 NEMESIS NA-600 OWNERS MANUAL 600 WATT RMS BASS GUITAR AMPLIFIER DRAFT RELEASE 6-17-97...
-
Page 2: General Description
Forward Congratulations on your purchase of the New Nemesis NA-600 Bass Guitar Amplifier by Eden Electronics. We are proud to present our Retro styled Hi tech Bass Guitar Amplifier, the NA-600. This Amplifier represents a great deal of research and design effort. We have put our... -
Page 3: Input Jack
Description of the Front Panel Controls Input Jack The input signal is inserted here for standard operation. Because of the wide level range available from our special input and gain circuitry, only one input jack is required for both passive and active instruments. Gain Control The gain control is used to match the output level of your instrument to the proper operating level for the Amplifier and Compressor Limiter. - Page 4 Gain Booster Switch This switch is set up to let you switch between standard gain and high gain on the fly. The Booster switch provides 6 dB of Boost to the signal when engaged. The light is on in the High gain position. Engaging the high gain switch may also work very well for older very low output Instruments.
- Page 5 Semi-Parametric Equalizer (Quazi-Parametric) A fully Parametric Equalizer has controls for Band width, center frequency and the level of boost or cut. These filters can be very difficult to set up correctly. These EQs have lots of good as well as bad sound combinations.
- Page 6 Master Level Control This control is directly ahead of the output power amplifier. It controls the main stage sound level and the Head Phone outputs. Head Phones The Head Phone jack is provided for practicing and can be used as an additional signal send or slave output as it follows the Master Control.
- Page 7 The Back Panel Operation Main AC Inlet (IEC standard) This inlet fits a standard computer office machine AC cord interconnect. The Fuse is located just above the plug receptacle. The correct voltage is displayed in the upper left corner of the holder and should read correctly with the rest of the printing on the amplifier.
-
Page 8: Tuner Output
If you have questions about the operation of your unit or have any service needs please contact us @ Nemesis service 1-612-675-3579 or 612-675-3650 and ask for the Nemesis Service Dept. CR Eden Electronics Inc. Montrose, MN 55363...