Safety information To ensure reliable and safe operation of this equipment, please read carefully all of the instructions in this user guide, especially the safety information below. Electrical safety ·The TV set should only be connected to a mains power supply which matches that stated on the label on the mains power adaptor.
OPERATING INSTRUCTIONS Contents Safety information--------------------------------------------------------------------------------------- Electrical safety ----------------------------------------------------------------------------------------- Physical safety ------------------------------------------------------------------------------------------ In the box -------------------------------------------------------------------------------------------------- Connection ------------------------------------------------------------------------------------------------ Rear connection panel -------------------------------------------------------------------------------- 4 Getting Started ------------------------------------------------------------------------------------------- Front panel controls ------------------------------------------------------------------------------------ 5 The Remote control ------------------------------------------------------------------------------------- 6 Using the remote control for normal TV functions ---------------------------------------------- 6 Initial Setup Instruction Guide ---------------------------------------------------------------------- Power ON/OFF: Standby mode -------------------------------------------------------------------- 8 Selection of Input Mode ------------------------------------------------------------------------------ 8...
In the box TV set Power supply cable Remote control - If any of the accessories are missing, then please contact Kogan Technologies. - Keep all the original packaging in case you need to return the TV to Kogan Technologies.
Connection Rear connection panel Number Name Function Description HDMI HDMI input jack (audio and video) VGA (D-sub) computer input VGA Audio IN VGA audio input (3.5mm stereo) YPbPr (1,2) IN YPbPr inputs YPbPr (1,2) Audio IN YPbPr Audio input S-VIDEO S-Video input COAX OUT Audio signal (digital) coaxial output...
Getting Started 1. Connect the aerial or input source to the appropriate input socket at the rear of the TV set (see page 4). 2. Connect the small round plug on the power adaptor cable to the power input socket at the rear of the TV set. 3.
The Remote Control Using the remote control for normal TV functions 1. Insert two AAA batteries, making sure that the polarity is correct as marked inside the compartment. 2. Aim the remote control at the IR sensor just below the green light (see page 5 for diagram).
Page 8
22-23.: These buttons are unused on this model 24. CH+ Press to select TV channel (see p.15 “Channel Skip”) 25. CH- Press to select TV channel (see p.15 “Channel Skip”) 26. DOT Press the number buttons with this to select channels directly (i.e.
Initial Setup Instruction Guide Power ON/OFF: Standby mode - Press POWER button on the remote control or on the side panel to turn on the unit. [The power indicator changes from red to green] - Press POWER button on the remote control or on the side panel again to return the display to standby mode.
On Screen Display (OSD) Menu After you have installed the batteries in the remote control, you can set setting preferences on the TV using the OSD menu system. Navigating about the OSD menu: The buttons used in the OSD menu include: ’MENU’...
On Screen Display (OSD) Functions Video Page Menu Adjustment of “Brightness” or “Contrast” 1. Press the Menu button, and the “Video” menu appears. 2. Press or Enter to enter the “Video” sub menu 3. Press to highlight your selection. 4. Press to adjust.
Page 12
Selection of “Color Temperature” 1. Press the Menu button, and the “Video” menu appears. 2. Press or Enter to enter the “Video” sub menu 3. Press to highlight “Color Temperature”. 4. Press or Enter to enter the Color Temperature submenu. 5.
Page 13
Table of Advanced Video Adjustment Settings Setting Options Description Off, Low, Medium, Select to control the sharpness Strong, Auto and noise reduction. Off, Low, Medium, Strong Select to improve the dynamic color level. Select “On” to correct the flesh Flesh Tone On, Off tone automatically.
Table of VGA Display Adjustment Items Description button to select it. H. Position button move the display left or right. button to select it. V. Position button to move the display up or down. button to select it. Phase button to adjust. button to select it.
Selection of “SPDIF Type” 1. Press the Menu button, and then press until the “Audio” menu appears. 2. Press or Enter button to enter the “Audio” menu. 3. Press to highlight “SPDIF Type”. 4. Press to select “Dolby Digital”, “PCM” or “Off”. 5.
Page 16
Using the “Channel Scan” 1. Press the Menu button, and then press he “TV” menu appears. 2. Press or Enter button to enter the “TV” menu. 3. Press to highlight “Channel Scan”. 4. Press or Enter button to start the channel search. 5.
Page 17
Selection of “Channel Edit” 1. Press the Menu button, and then press until the “TV” menu appears. 2. Press or Enter button to enter the “TV” menu. 3. Press to highlight “Channel Edit”. 4. Press or Enter button to enter the submenu. 5.
Setup Page Menu Use of the “Time Setup” menu 1. Press the Menu button, and then press until the “Setup” menu appears. 2. Press or Enter button to enter the “Setup” menu. 3. Make sure “Time Setup” is highlighted, press as required.
Page 19
“Sleep Timer” Option This option is replaced by use of the SLEEP button on the remote control. See Page 6, button 19 for more details. “Reset Default” Selecting this option will return items in the setup menu to factory default (Note: this will not reset the Parental password) 1.
Note: The initial password for the system is “0000”. If you have changed the password and forgotten it, please contact Kogan Technologies. It is advised that the password be changed the first time the Parental Menu is accessed. Do not forget your new password! Using the “Change Password”...
Page 21
Using the “Program Block” function 1. After entering the “Parental” menu, press to highlight “Program Block”. 2. Press or Enter button to confirm. 3. Press to choose from the following options: - Block All - No Block - Block R and above: restricted 18+ - Block AV and above: adult audience.
Page 22
Using the “Clean All” function 1. After entering the “Parental” menu, press to highlight “Clean All”. 4. Press or Enter button and the “Are you sure” Popup menu will appear. 5. Press to choose between “OK” and “Cancel”. Choose “OK” to Clean All. This will remove all Parental Blocks from the system (the password changes will remain).
Troubleshooting Before contacting a service technician for any problems that arise, perform the following simple checks. If the problem persists, unplug the LCD TV and contact Kogan Technologies. PROBLEM POSSIBLE SOLUTION - Check that the main plug has been properly connected to a power outlet.
The following troubleshooting problems below refer only to VGA mode. PROBLEM POSSIBLE SOLUTION - Adjust resolution, horizontal frequency, or vertical frequency. The image is not appearing on - Check it whether the signal cable is connected or loose. the screen properly - Check the input source.
Features ·High Definition display. ·Support HDMI Interface (HIGH-DEFINITION MULTIMEDIA INTERFACE). ·DVB-T Tuner Built In. ·RF, HDMI, VGA, S-Video, YPbPr, AV inputs. ·Stereo audio inputs. ·Coaxial Digital audio outputs. ·Automatic or manual channel search. ·Auto-shutdown to save power when no signal is present. Specifications TV System PAL/Secam/NTSC...